Storage addition (LUNs) in RAC - 4 node setup
Brief Steps:-
·
Storage
team will assign the LUNs to all the nodes in the cluster.
·
Unix
team will re-scan the multipath config... to identify the newly added LUNs
è In case of non-visibility of these LUNs,
there are 2 options
1. Restart the multipath daemon
services.
2. Restart the complete server
We can check the same under /dev/mapper (if it’s multipath
config) Otherwise you can check under /dev/disk/by-id
è cross checking the LUN’s with LUN
ids in all nodes
è Disk partioning using fdisk (in any
node ex:abc1 in my case)
è After partioning they won’t visible
in other nodes, then we have to use ‘kpartx –a’ command to add them.
è Using ASM libraries... labeling the
disks
Upon
getting confirmation from both storage and UNIX team… we must crosscheck below
things on all nodes in the cluster.
Under /dev/mapper
-> check all the LUNs having same multipath names and LUN Id’s below is the
example for it
First Node: abc1:root@[/dev/mapper]
------------
# multipath
-ll|grep mpath2
mpath225
(3600601607c4133005386b1d6cf5ee611) dm-151 DGC,VRAID
mpath224
(3600601607c413300e8b4e365d35ee611) dm-158 DGC,VRAID
mpath223
(3600601607c413300e8394011d35ee611) dm-157 DGC,VRAID
mpath222 (3600601607c4133002e63b6c2d25ee611)
dm-156 DGC,VRAID
Second Node: abc2:root@[/dev/mapper]
# multipath -ll |
grep mpath2
mpath225
(3600601607c4133005386b1d6cf5ee611) dm-158 DGC,VRAID
mpath224
(3600601607c413300e8b4e365d35ee611) dm-157 DGC,VRAID
mpath223 (3600601607c413300e8394011d35ee611)
dm-156 DGC,VRAID
mpath222
(3600601607c4133002e63b6c2d25ee611) dm-155 DGC,VRAID
Third node: abc3:root@[/dev/mapper]
# multipath
-ll|grep mpath2
mpath225
(3600601607c4133005386b1d6cf5ee611) dm-158 DGC,VRAID
mpath224 (3600601607c413300e8b4e365d35ee611)
dm-157 DGC,VRAID
mpath223
(3600601607c413300e8394011d35ee611) dm-156 DGC,VRAID
mpath222
(3600601607c4133002e63b6c2d25ee611) dm-155 DGC,VRAID
Fourth node: abc4:root@[/dev/mapper]
# multipath
-ll|grep mpath2
mpath225
(3600601607c4133005386b1d6cf5ee611) dm-159 DGC,VRAID
mpath224
(3600601607c413300e8b4e365d35ee611) dm-158 DGC,VRAID
mpath223
(3600601607c413300e8394011d35ee611) dm-157 DGC,VRAID
mpath222
(3600601607c4133002e63b6c2d25ee611) dm-156 DGC,VRAID
Upon crosschecking all the LUNs are having matching LUN ids
in all the nodes, Proceed with disk portioning,
Only disk partitioning and disk creation… I’m demonstrating
here
ASM partitioning
# fdisk -l /dev/mapper/mpath222
( this is to double check.. if partition already available or not)
Disk
/dev/mapper/mpath222: 53.6 GB, 53687091200 bytes
255 heads, 63
sectors/track, 6527 cylinders
Units = cylinders
of 16065 * 512 = 8225280 bytes
Disk
/dev/mapper/mpath222 doesn't contain a valid partition table
# fdisk /dev/mapper/mpath222
Device contains
neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new
DOS disklabel. Changes will remain in memory only,
until you decide
to write them. After that, of course, the previous
content won't be
recoverable.
The number of
cylinders for this disk is set to 6527.
There is nothing
wrong with that, but this is larger than 1024,
and could in
certain setups cause problems with:
1) software that
runs at boot time (e.g., old versions of LILO)
2) booting and
partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Warning: invalid
flag 0x0000 of partition table 4 will be corrected by w(rite)
Command (m for help):
u
Changing
display/entry units to sectors
Command (m for
help): n
Command action
e
extended
p
primary partition (1-4)
p
Partition number
(1-4): 1
First sector
(63-104857599, default 63): 2048
Last sector or
+size or +sizeM or +sizeK (2048-104857599, default 104857599):
Using default
value 104857599
Command (m for
help): w
The partition
table has been altered!
Calling ioctl()
to re-read partition table.
WARNING:
Re-reading the partition table failed with error 22: Invalid argument.
The kernel still
uses the old table.
The new table
will be used at the next reboot.
Syncing disks.
To make the partition to be visible
on each node, perform below steps on every node :-
kpartx -a
/dev/mapper/mpath222
kpartx -a
/dev/mapper/mpath223
kpartx -a
/dev/mapper/mpath224
kpartx -a
/dev/mapper/mpath225
Disk Creation:
# /usr/sbin/oracleasm createdisk ORADISK74 /dev/mapper/mpath222p1
Writing disk header: done
Instantiating disk: done
--
Upon creation... scan
all the nodes:
14:48:47 root@abc2:
/dev/mapper
#
/usr/sbin/oracleasm scandisks
Reloading disk
partitions: done
Cleaning any
stale ASM disks...
Scanning system
for ASM disks...
Instantiating
disk "ORADISK74"
Instantiating
disk "ORADISK75"
Instantiating
disk "ORADISK76"
Instantiating
disk "ORADISK77"
14:50:52
root@itsolx0002: /dev/mapper
Just cross-verify
#
/usr/sbin/oracleasm querydisk -d ORADISK74
Disk
"ORADISK74" is a valid ASM disk on device /dev/dm-164[253,164]
15:52:06
root@itsolx0008: /dev/mapper
SQL> select
PATH,HEADER_STATUS from v$asm_disk where HEADER_STATUS='PROVISIONED';
PATH HEADER_STATU
-------------------
------------
ORCL:ORADISK77 PROVISIONED
ORCL:ORADISK74 PROVISIONED
ORCL:ORADISK75 PROVISIONED
ORCL:ORADISK76 PROVISIONED
Thanks.!
